How to Build a Manicure Table

Being a nail shop owner is extremely difficult, especially if youre trying to set up your businesss on a tight budget. One easy solution is building your own manicure tables instead of purchasing them. The process requires little effort and will save you hundreds of dollars. Does this Spark an idea?

Instructions

1




An end table or drawer unit is easy to assemble.

Assemble the two end tables (or drawer units) according to the instructions on the manual.

2




Place drawers in your direction will also add extra storage for you.

Align the two end tables (or drawer units) evenly with one another. Leave a gap big enough to satisfy your needs. Remember, you will have chairs so they must be able to fit between the two end tables. Point the drawers towards you and not your client for a more professional look.

3




Ensure your measurements are accurate.

Measure the width of the two tables horizontally from the far end of the first end table to the far end of the second table. Write down the measurement in inches. This will be the width of your custom-fitted glass

4

Measure the length of one end table vertically. Record your measurements in inches. This will be the height of your custom-fitted glass.

5




Measure the glass before you place it onto the table ends to ensure it's the correct size.

Order a custom -inch-thick glass using the measurements previously recorded.

6

Place your rubber pads on the corners of each end table. Wiggle the rubber pads with your finger to ensure they do not move.

7




Use caution when fitting or working around glass.

Place your custom made -inch-thick glass on the two end tables accurately on the rubber pads. Shake the glass with minimum force to check that it is secure.